duratrax nitro evader

[sk8freak123]

hi i can't get my nitro evader to move, i start it spur spins but nothing else does, i've cracked tha diff case and checked inside and nothing is stripped, im thinking i just need a diff rebuld kit

[roadrunnr43]

did u check to see how tight the slipper clutch is?
thats probabley ur problem.

I got a nitro BX

[bugz2002]

my friend had a nitro evator and i his had the same problem but then he super glued his diff and that fixed it so your most likey right with the rebuild of the diff.

[sk8freak123]

i need to know how to bleed the shocks:confused: , and im picking up a rebuild kit on monday:D , or tommorrow im not sure:confused: , and also i might be buying a os .15 with the square head tonight or tommorow:D :D

[ngw]

i own an evader st. acouple of things you need to check 1. inside the trans. you said you didnt find any gears stripped,but i would check diff gear again as i have broken the centerout of the gear on several occasions. i went to the alum. one and havent had this problem since. 2.with the rear of truck held up turn one of the rear tires. the other should turn in opposite directin. if this is the case your diff is ok. 3. take appart your spur gear and inspect and clean slipper clutch.spilt fuel and oil will cause it slip and not grab or it could be worn. hope this helps.

[sk8freak123]

i own an evader st. acouple of things you need to check 1. inside the trans. you said you didnt find any gears stripped,but i would check diff gear again as i have broken the centerout of the gear on several occasions. i went to the alum. one and havent had this problem since. 2.with the rear of truck held up turn one of the rear tires. the other should turn in opposite directin. if this is the case your diff is ok. 3. take appart your spur gear and inspect and clean slipper clutch.spilt fuel and oil will cause it slip and not grab or it could be worn. hope this helps.

i have the aluminum rear diff gear, the slipper pad is dry but a bit worn so i tightend it as much as i could, if i turn one of my rear tires the other one dosent even move, and when i roll the truck the spur dosent even move, do i need a rebuild???,

how would i bleed the shocks???

what brand of beadlock rims could i use for the evader???

[roadrunnr43]

one question at a time
yeah, u probably need to rebuild your diff.
I dont know how to bleed the shocks, maybe you could post your question
somewhere else, cuz alot of people know how to do it, maybe just not one
of us. try posting under monsters
you can use pretty much any kind of wheel onthe evaders, you just need
some hexes to go with em