maxxdout
09-30-2008, 10:49 PM
Here are a few small things I did to my B4 to make it a better ride..
1. Loose the front body mount screw and cut off the rear body post(Or you can keep it there). Now get some industrial strength velcro and apply the "hook", or rough velcro to both sides of your chassis and the "loop", or soft velcro to your body. Now, you have a more sturdy body mount method :D
2. Grab some foam tape(single sided) and apply a thing strip to your battery bar. This is very helpful when you are using a LiPo, as LiPo's are usually thinner than the standard NiMh or NiCd packs and therefore, it will move around a bit more.
Hope this helped some B4 owners out :)
Thanks,
maxx
1. Loose the front body mount screw and cut off the rear body post(Or you can keep it there). Now get some industrial strength velcro and apply the "hook", or rough velcro to both sides of your chassis and the "loop", or soft velcro to your body. Now, you have a more sturdy body mount method :D
2. Grab some foam tape(single sided) and apply a thing strip to your battery bar. This is very helpful when you are using a LiPo, as LiPo's are usually thinner than the standard NiMh or NiCd packs and therefore, it will move around a bit more.
Hope this helped some B4 owners out :)
Thanks,
maxx