Chris Ramos
06-29-2007, 07:01 PM
:) Well , Here is My Ride. http://www.automodelismospeedworld.com[/IMG]
This is the 1/8 scale radio controlled, nitro powered, ready-to-run
Hyper 8 .28 Truggy from Ofna.
Designed and tested by the Ho Bao International Racing Team.
FEATURES: Chassis: 19" (482.6mm) aluminum
Drive: Four wheel shaft drive
Radio: Ofna Tx-2 3 channel transmitter
Servos: Metal gear steering servo
Engine: Ofna Mac-Star .28 cu in (4.6cc) with pull-starter, slide
valve carburetor, glow plug, oval foam air filter
Exhaust: Polished dual chamber tuned pipe
Body: Painted with rear wing
Clutch: racing type clutch shoe
Wheels: Six spoke 3.81"(97mm) diameter, 2.83" (72mm) wide
Tires: High traction truggy 5.25" (133.35mm) diameter, 2.83" (72mm)
wide
Suspension: Long travel, long C-hub with front universals,
adjustable anti-roll bars
Camber: Adjustable front and rear camber refers to the angle of the
tires from vertical when viewed from front or behind vehicle
Ball Bearings: Full set, rubber sealed
Shocks: 14mm hard anodized oil filled with molded composite shock
towers
Steering: Adjustable turnbuckles for front and rear steering
with laydown servo
Brake: Dual disc
This is the 1/8 scale radio controlled, nitro powered, ready-to-run
Hyper 8 .28 Truggy from Ofna.
Designed and tested by the Ho Bao International Racing Team.
FEATURES: Chassis: 19" (482.6mm) aluminum
Drive: Four wheel shaft drive
Radio: Ofna Tx-2 3 channel transmitter
Servos: Metal gear steering servo
Engine: Ofna Mac-Star .28 cu in (4.6cc) with pull-starter, slide
valve carburetor, glow plug, oval foam air filter
Exhaust: Polished dual chamber tuned pipe
Body: Painted with rear wing
Clutch: racing type clutch shoe
Wheels: Six spoke 3.81"(97mm) diameter, 2.83" (72mm) wide
Tires: High traction truggy 5.25" (133.35mm) diameter, 2.83" (72mm)
wide
Suspension: Long travel, long C-hub with front universals,
adjustable anti-roll bars
Camber: Adjustable front and rear camber refers to the angle of the
tires from vertical when viewed from front or behind vehicle
Ball Bearings: Full set, rubber sealed
Shocks: 14mm hard anodized oil filled with molded composite shock
towers
Steering: Adjustable turnbuckles for front and rear steering
with laydown servo
Brake: Dual disc