post traxxas setup here.

[savage24x]

post your traxxas setup in this thread.

my 1/16 E-REVO VXL: stock.

[Philderbeast]

my 16th revo street use, not sure of the brand, but very agressive street tires, dish wheels, 60 wt shock oil, 2 batteries for added weight and balance, shocks threaded for very low ride hight, parallel adapter. Offroad, stock tires, shocks threaded tight for almost maxx suspention hieght, the rest the same.

The old revo I had, I used a 2.5 revo, 3.3 motor, stock tranny, stage 3 rockers and links, 60 wt rear shock oil, 45 in front. spool rear diff, 60,000 wt diff oil in front diff, 20,000 in rear diff, purple shocks in front, black in rear, proline 40 sieries dish rims and bowtie tires. Some more stuff I will not share just in case I race again in mt class w/ a revo.

rustler, when I sold it, I ran heavy springs (green) in rear, stock in front, 50 wt oil in rear, 25 in front 2 hole pistons in front 1 hole in rear. rear shocks adjusted in 4th hole from wheel, front 2nd from wheel. stock tires, 13d fireball motor, ae esc, 86t spur, 17t pinion.

[NHRCA_Revo]

my old revo 3.3 had long travel fronts progressive rears, black springs in back stock reds up front i had 30k weight in rear diff (i think) and stock front. my friend had a custom wheelie bar that made mine able to stand straight up all the way down our road. but without a wheelie bar it would for the most part flip itself on its lid but it fell into a coma when its engine seized after plummeting into a pond so i sold it

[pedeboi364]

Hooya... Traxxas stampede;
RPM arms all around, integy piggyback shocks, trx rr aluminum bearing carriers, vxl wheels/tires, slash body mounts, rc-screwz screw kit, lrp
vector x-11 8.5t motor, castle creations sidewinder esc, 6c proboat 4200mAh pack & 7c 5000mAh venom pack, proline desert rat body, traxxas waterproof servo

tmaxx;
.18 xtm engine, rpm truetrack and fr arms, airtronics/kyosho/hitec servos, proline ram charger body B)

[NHRCA_Revo]

rc-screwz screw kit

How are those? are they hex or phillips i was thinking off gettting some cause im missing alot of screws

[pedeboi364]

They are great! All hex heads but very good quality. Im picking up 2 more kits for my maxx and rc18. Theyre deff worth the time and money

[slashman21]

traxxas slash
proline bowtie sc
RPM aarms f/rear
stock esc , motor , servo

Coming soon
Proline silverado sc body
turnigy 5.0 lipo

[Fiero_Man_121]

well, i just ordered a bunch of stuff thursday so heres how my setup is gonna go:

SRT (t4 KiLL3R)

Panther Step Pin (Medium Soft)
Team Losi Directional Ribs (Red)
TRX N.Rusty rims (respectively F&B)

Spektrum SR3000 Rx
Dx2.0 Tx
Hitec HS5625mg servo
Racers Edge Servo Saver Hitec (Black)

T4 shocks
Losi Pink springs (b)
TRX Red (f)
30wt (f)
37wt (b)

Full Metal Gear Tranny
MIP CVD's (slash ones)
83/23 spur/pinion (losi brand pinions & updated trx slipper assembly)

RPM arms on all 4 corners
Lunsford Turnbuckles

Novak GTB (no turn limit)
LRP X-11 7.5t sensored

Tony Screwz... screws
Boca Bearings everywhere
HPI Lotus Sport body
5oz of weights on front to contain the beast-ness

SPC 5000mAh 20c 7.4v lipos w/trx plugs
SPC EnerG 4600mAh 7.2v 6 cell sxs w/trx plugs

[BAJA 1000]

My T to the Maxx is RRP all around gears with the O.S18 CVRX engine a Tiger Drive start and one of my all time favorite racing tune pip C-Vec. Everything els is pretty much stock oh exept for the rear spoll, yeah I like hill climbing. I have this T-Maxx since late 1999 yeup is the 4910 model and still kicking it.

I have a Rustler as well but all stock exept for the Tekin ESC and Trinity 27T motor and battery.