Wrench's Project " Head Honcho"

[WrenchHead]

Hey All; Well all I really needed from the LHS was a can of paint and look what stray followed me home. My very own Axial Honcho. Since the F-103GT build is about wrapped up I am using what is left from my Xmas bonus for this rig. There it was just sitting on the back shelf calling my name. Need to do a bit of research on this rig and scoure the www for info and pics for ideas. You all know me so let the fun begin. 1st item was just purchased. Got a Honcho to Tacoma grill decal kit from Bowtie over on RCC. So the short list includes. Motor/ESC,Recv./Servo. Winch and wire rope. A few scale items. Axial interior/exterior detail kits.That should get me started. lol Here are a few pics. The seal cherry is still fresh. But for how long.lol l8r,w.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03323.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03321.jpg



http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03322.jpg



http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03318.jpg

[WrenchHead]

Thanks for the ideas fellas. I am stoked about this build. Have finally popped the seals on the lid and Wrenching has commenced.lol I ordered a few items. I went with a Tekin FXR ESC 35T HW motor combo. Some GateKeeper rock sliders.A 4 link rear axel truss bar.Bowtie TACO decals. Got a MG645 servo and CC BEC on hold at mt LHS. Still a ton of goodies to go. But need another paycheck for those. :( Well here is my late night day #1 build time. Enjoy.l8r,w.


Get on my build table Bitc*. lol Everybody out da box.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03328.jpg

OK then lets get started.

Stage 1;Step 1.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03329.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03330.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03331.jpg

I sealed the axels with silicone and greased all the bearings and axels.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03333.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03332.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03334.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03335.jpg

Had some alloy parts and a set of cvd's.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03337.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03338.jpg

time for some drive line axels. what a PITA to get those U jionts in. 2 cuts later its''s done.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03339.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03340.jpg


Well gotta go get some stuff from the LHS. Be back later with the rest of the pics.

[roadrunnr43]

its strange what will follow you home from the shop. i go in for hardware and come out with a bunch of raw materials.

[WrenchHead]

Hey All; Got a few more pages done on the rig and some parts are starting to arrive. Sweet I love hop ups and option parts. Here is the next installment. Enjoy.l8r,w.


So next was onto the shocks. Wow I never really like doing these but I still do. Have had a few issues with these stockers so I am going to get a set of ProLine Powerstroke Scale Shocks. On my list after some bills get paid first. Sux those keep showing up every month.lol

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03341.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03342.jpg



http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03343.jpg



http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03344.jpg


Only one problem the shox don't seem to match the measurments in the book. Typo or screw up?

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03345.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03346.jpg

And time for some links to add to the pile of shocks and axels. Starting to look a bit like something. Naa still just a pile O parts.lol

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03347.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03351.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03348.jpg

Add the lowers and we got a set ready to go.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03350.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03352.jpg

And what good are axels without a trannsmision. Gots to make em go roundy rounds,right.lol I had a Extra Heavy Duty set of Trans outdrives I scooped up on RCC.Shouldn't have any probs with these. I hope.lol Also I decided to seal the trans with RTV silicone as well. Trying to make it a bit water resistant. Trying optimal word.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03353.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03354.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03355.jpg


Going to source up a non slipper clutch but for now I installed the stocker .I did lock it down fully.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03356.jpg


Stay tuned for more build pics and info.

[BAJA 1000]

Super nice I'm falling for this Honcho truck.

Are you water proving it?

[WrenchHead]

Hey All; Well onto the next faze of the build. So now I need to mount the trans to the skid and build the chassis so I can add the axels and trans.Then onto the next few pages. I will deveate a bit so as paint is drying I can work in some parts pages.I did a bit of reading before I even opened the box. Sucked waiting 2 days to even look inside the box.So stuff I ordered started coming in. Got my TACO decals. And my My Tekin showed up tonight. So while researching on RCC I saw a guy who did a inside out paint job. He painted the outside for the scale look. But painted the inside as well so when you scratch the outside the paint inside shows through. Sweet idea had to give it a try. Also been working on the rims and tires. Weighted the wheels and deanodized the outside rock rings. Man that is a lot of screws. So here are the next set of pics. enjoy the journey.l8r,w.

Trans and skid.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03357.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03358.jpg


Fill in servo. I ordered a HS795TG for my AX-10 and will move that servo (witch I barrowed from my Turmiol Pro) to the slash and move the HS645MG waterproofed servo in the slash to the Head Honcho. I am going to get a handbros chassis servo mount kit. When funding allows.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03359.jpg

Gotts to have a set of rods to make the wheels move.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03360.jpg


Well time to spread out the back bone and build it into a spine. This is gunna be fun.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03362.jpg

Decided to put 1/2 the stuff all on one side. Then spin the workmat and repeat the other side.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03363.jpg

Walla,ready for axels.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03364.jpg

Anyone ready to hang an axel. I am. Woo Hoo starting to look like a Taco to me.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03365.jpg

And just have to add the next one as well. all good trucks need 2.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03366.jpg

Starting to get some of the tube work put together. I deided to add a scale touch to the front bumper light covers. Just used a toothpic and some white model paint.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03368.jpg

[WrenchHead]

Hey all;

So are we ready for our next installment everyone? OK so sit back and grab a cold one. Next on the build pages was the tubework. Witch you saw the front bumper when we left off. SO I had to assemble the rear section of tubework and the Diamond plate aluminum flat bed. It is lexan so it had to be painted up. So I decided to try something I have never done but have read about and wanted to try. It mixed up gold,red and black paint in an old paint cap trying to get a brownish dirty color.Then using rubber gloves.Dipped an old toothbrush in the paint,tapped off excess and pulled back on the brissles and flung drops of splatter dots onto the lexan. In one spot I dropped a BIG old drop of paint but wipped it off with a clean rag and left the wipe marks. Then I backed it with some indy silver for the diamond plate look. Then on the bottom I used some left over Fleckstone paint over the silver to look like a RynoLiner textured look. And added a coat of flat black .99 wally world paint. Seems to have worked.I also decided to paint the the fuel cell and not use the supplied decals. I did use the cap decal only. Here are the pics to go with,Enjoy. l8r,w.


So who went and got my truck bed dirty?? Dang I need to get out the garden hose now.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03375.jpg

Lil texture never hurts,eh?

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03376.jpg

[roadrunnr43]

five stars on the dirt and crud

[WrenchHead]

Well onto the next pages of the build job. So I ordered up a Tekin FXR with a 35t motor. I installed Deans plugs on everything and since I plan on getting a 3 Cell LiPo for it I went up one guage size in wire diameter on the Battery side of the ESC. Kit supplies 14G I bumper to 12G Wet Noodle Deans Wire.Left the 12G wire going to the motor leads. I also decided to use the Axial recv. box for my ESC and BEC storage. I sealed the top and wire outlet hole with some more RTV Silcone to waterproof things a bit. Since I will be running a Losi Comp Crawler 3 cell battery I will have room on the battery tray for a Traxxas Waterproof Recv. box.It has been mounted as well and ready for a recv. Scored a set of Rock Sliders from GateKeeper designs. Got the wheels weighted and the tires mounted up and on the chassis. I didn't like the grey rock rings and had a set of green ones I stripped to silver but didn't use for the Blazer build and found them in the spares box and they look better. I detailed the wheel nut caps and added a dab of glue to hold them in place.One more thing I got done was to paint the front bumper metal inserts black with some appliance epoxy paint. Waiting on a fairlead and a 3Racing winch to complete the front bumper.So here are some pics to go with. l8r,w.

Time to bust out the goodied. Here is the heart and the brains of the operation. Hmmm 3 cell and 35 turn motor. Should do pretty good on wheel speed.I like opening NIB electronics.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03378.jpg

Solder station is up and running with help from my buddy Deans. Upped the battery wires and soldered in the CC BEC.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03379.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03381.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03380.jpg

Decided later to just solder the motor leads direct to the ESC and remove those 2 deans plugs. Live and learn. Was going to make it moveable from rig to rig. But If I waterproof it I don't wanna break the seal.lol


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03383.jpg

Added the second recv. box from a slash.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03382.jpg

Gatekeeper Rock sliders all mounted up.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03384.jpg

Went all black on the front bumper. Hope this new epoxy paint holds up. If not I'll strip it off.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03388.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03385.jpg


Went and stripped my green rings from my leftovers build. The grey ones are harder to strip. And I like the silver look.

http://i180.photobucket.com/albums/x254/RCKrazy/EEEZZZ%20How2/DSC02835.jpg

Stripped em in under 30 mins. Love greased lightning.

http://i180.photobucket.com/albums/x254/RCKrazy/EEEZZZ%20How2/EEZZHow2007.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/EEEZZZ%20How2/EEZZHow2016.jpg

Finished up and mounted up. Man that is alot of screws.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03389.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03392.jpg

Went and detailed the center caps a bit.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03390.jpg

[Arct1k]

Nice job on the wheels

[OldSchoolRC]

Looking good!! I will add that those universals were the toughest set I've ever put together.

And the beadlocks take forever when you do not realize there are 2 types of beadlock rings, and you build 2.5 wheels with the small rings, open the next pack, scratch your head, throw out a few cuss words and start over. :) oops!

This is a great truck - a very satisfying build and performs well right out of the box.

[WrenchHead]

Wazz Upp All; So I have had some time to get a few things in the mail and on the truck. The ESC/Motor is all done. As well as the Hitec HS645MG servo. Decided to just toss a TQ2 radio set at it for test and tune.So here is the finished work for the bodywork and paintjob. I decided to barrow an idea off RCC about an inside out paintjob. I painted the inside lightly with some black and some silver followed by a full coat of Copper.Ana then painted the outside like a hardbody rig. So when it gets scratched the copper color shines through from underneath. Neat idea and will post up some after pics when I shag it a bit. Well here are the pics to with,Enjoy.l8r,w.

So I washed it real good and lightly tossed some black and silver in the big areas,Then added a full coat of the new Testors RC Copper color for Lexan. Then I backed it with black.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03369.jpg


Here is the cab and the bed in mock up faze.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03370.jpg


Close up pic of copper paintwork on the inside on the hood area.Also painted up the light buckets and got them ready for LED's.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03371.jpg

So after the paint dryed I decided to cut off the outer plastic cover. But leave the windows covered.Then I scuffed up the outside with a scotchbrite pad.Painted a coat of Indy Silver first then went with a coat or 3 of Candy Blue.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03372.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03373.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03374.jpg


So after pealing off the inside and outside window masks and a few decals it was time to combine the rear bed section and the Lexan cab. What a PITA. The screws all the way up on the top on the inside really reaally SUCK. Here is TACO HELL. Still in mock up awaiting LED work and my winch as well.Looking at some new scale rims as well.




http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03377.jpg

[TwiztidMetal]

That there is a really nice truck!

[WrenchHead]

Well onto the next phaze of this build. Time to get LIT UP!!!! LED's here we come. So I have had this Yea Racing 6 light Drifter kit I scored cheep. And have been waiting to use it. Well here is the build for it. I went with 2 colors mounted on the frame and 2 colors in the body and 2 more on order since the kit only came with 4 light sets. 1 White,1 Red,1 Yellow, 1 Blue. Also for the rear lights I saw an idea on RCC and added to it a bit. I sanded down a clear lens that was close to fitting in the chassis brace light mount rear bumper. I then used some Tamiya clear red model paint on the inside of the lens. Then glued them in place with some black RTV silicone. I am working on the lightbuckets for the body and mounted the white/yellow led's in those. Just need to let them dry and then mount them in the body. Here are a couple pice of the red rears and the blue front spots. I ordered 2 sets of whites for rocklights to fill out the 6 outlets on the main box. Also scored my new Losi 3 cell comp crawler battery. That fits like it was made for it.l8r,w.

New power plant go go juice. 3 cell 30C

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03406.jpg

Fits like it was made for it. me likey lots.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03414.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03415.jpg

Here are the lenses mounted and ready for some LED power.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03409.jpg

Powered up. Extra red.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03411.jpg



Here is what they look like with the bed on the chassis. I like the look.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03416.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03417.jpg


And here is the Blue LED's up front in the spots. You will see why later down the road. he he he.....


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03413.jpg



http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03412.jpg

[isaac199]

so greased lightning actually takes off paint? or annodized parts?

[LSXEric]

Nice! One word though: Rocklocks!!

[WrenchHead]

Hey All: I got the lights mounted in the body for the headlights and running / marker lights. Here are the pics to go with. Can't wait for my winch to get here so I can finish up the front bumper. Oh well other things are showing up and on order. Got some sweet scale items variety pak from Team36 racing and paintworx. Norm hooked me up real good. Got my rear 4 link axel truss in today from R2J Kustoms. And finally got my Proline Powerstroke shocks ordered as well.So enjoy the pics.l8r,w.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03448.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03449.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03451.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03450.jpg


Just a short test vid of the light kit.

http://www.youtube.com/watch?v=EflaNdf-7tM

[WrenchHead]

Hey All;
Well I have the rig almost ready for test runs. Was going to go out today but weather has changed all that. Also seems I am having a bit of a problem with my charger. Connection Breakdown appears in the display whenever I try and charge a 3 Cell LiPo and beeps like mad till I hit reset. But it will charge a 2 cell no problems. Man I don't need this now. I am still waiting on some goodies and I need to order some more goodies as well. lol we all know that all too well. So here are a few shots of it on the workbench. Thanks for all the kinds words from you fellas as the build has progressed. I really appreciate it alot. Enjoy.Wrench.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03445.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03444.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03453-1.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03443.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03446-1.jpg

[Fiero_Man_121]

awsomness! me <3 yota in matalic blue no less

i gotta ask, where did you get the microscopic rc? its the first time ive seen it on a scaler. and i think its perfect!

[BAJA 1000]

That's nice, good work man.

[WrenchHead]

awsomness! me <3 yota in matalic blue no less

i gotta ask, where did you get the microscopic rc? its the first time ive seen it on a scaler. and i think its perfect!

I got the super Micro RC from Target. It is a fully functional RC. It was a finishing touch I just had to have. They are from Terrain Titan. They also had a Pick up type body.

[WrenchHead]

Hey All;
Well after having to put things up a bit item and ideas are still rolling in. I finally got my winch from the Far East and my delrin fairlead installed on the front bumper. Also scored my ProLine Powerstroke Scale shocks. Good thing axial included a huge bottle of 30wt shock oil in the honcho kit since I recently used up the rest of mine.Also got my rear 4 link truss in as well. Just need the rear longer links to get here. OK here are the pics of the winch work.Man I need another little battery to power the access. Well I would have already finished the shocks but I went and broke a toe on my left foot the other night. Been using the laptop from bed with my foot all messed up. Still working doesn't help but I have to broke toe and all.At least they gave me some good pills. Man these things kick.l8r,w.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03473.jpg



http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03474.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03472.jpg


Shocking isn't it.......



http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03475.jpg

[OldSchoolRC]

I installed my winch, but have yet to hook it up. Post up what you think about those shocks, I love the way they look, but for $60....ouch

[WrenchHead]

Hey All; Well still working away as I try and figure out the charger problems. And work continues as well. The shocks are on but the fronts need to come off and get some heavier fluid.And I decided to get a Axial interior kit since looking into the abayss of the windows. And I scored a snorkel off RCC a while ago and made it work on the Taco. Here are a few pics for your viewing pleasure.l8r,w.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03483.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03484.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03490.jpg

[BAJA 1000]

Where did you got your winch? I was checking on TGN and they are out they even got a wireless winch, but they are out as well.

thanks in advance.

[WrenchHead]

Got the winch from an estore. ToyEast I think it was. Real good price. HtH

Well got the paint laid down last night and cut it out tonight. Now I just need to add the fine details like arm rest and windowcranks. Everything is painted and dry and ready for some work.Maybe later if there is an update ready. Enjoy.l8r,w.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03489.jpg

[Taylor]

Very, Very nice my friend. Keep up the good work.

[WrenchHead]

Thanks. I try. lol best I can do. Got a bit more done for your viewing pleasure. Here are a few close-ups and some completed detail pics.Enjoy.l8r,w.


Dash and steering wheel work.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03495.jpg

Assembled and I just got a new idea !! be back in abit. holding..........

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03498.jpg

Had to stop off and graba 12 pak. And I will toss my RC in the cab while I'm in the store.lol

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03499.jpg

Ahh My idea. Here it is. A piece of a black rag I have in the garage. Whaa La. Instant Carpet.
Used some spay adheasive to secure.Works for me.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03500.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03501.jpg

[Fiero_Man_121]

this build is looking great! i cant wait to see its final form!

[WrenchHead]

So here is the mounted up in the cab pics.Here you all go.l8r,w.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03502.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03503.jpg

[roadrunnr43]

very nice interior. but why only one 12 pack? arent you going to invite friends? haha.

[WrenchHead]

Hey All; Update!!! So I finally got the 2 other sets of lights I ordered for my LED kit. These 2 I got whites for some Rock Lights. In the front I just used a set of the flush mounts that came with the Honcho kit in the front bumper. And in the rear I picked an out of the way and protected spot for a couple of spoters with grills from the4 Honcho kit in the rear. SO that rounds out that part of the build. I have got a set of rims coming and a set of tires as well. SO stay tuned for some new updates. Also thanks guys for all the kind words. Enjoy the pics.l8r,w.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03540.jpg (http://s180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/?action=view&current=DSC03540.jpg)


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03541.jpg (http://s180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/?action=view&current=DSC03541.jpg)


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03542.jpg (http://s180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/?action=view&current=DSC03542.jpg)


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03544.jpg (http://s180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/?action=view&current=DSC03544.jpg)


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03545.jpg (http://s180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/?action=view&current=DSC03545.jpg)


Bonus pic of some of the scale items I have installed along the way.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03546.jpg (http://s180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/?action=view&current=DSC03546.jpg)

[BAJA 1000]

Wow that truck came out awesome, now we need action scenes with the little Honcho.

Good work man.

[WrenchHead]

Hey All; Well this build is slowing down and getting closer to actually hitting the trail. And there has been some work on the trail it will be hitting. So I have been trying to find some rims to get and the ones I really wanted are no longer availible. So I was watching eBay and found a set of CAC Toyota rims nonbeadlocks in a grey delrim or PVC. Man this stuff is real hard to grind on the prep the edges for CA glue. And I went with a set of RC4WD 1.9 Rock Creepers and a set of there scale hub lockers. I went and painted the rims black and then matt cleared them as well. Here are some pics of the rims and tires. Enjoy.l8r,w.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03565.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03588.jpg

Man I really don't like gluing tires. What a pain the Butt.lol

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03610.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03617.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03618.jpg


Would have gone outside but it is now raining here. So maybe later on.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03616.jpg

[WrenchHead]

Well rain letup and I got her out for a bit. Was working on my woods area and getting a lil progress done.Enjoy.l8r,w.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03624.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03619.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03621.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03620.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03626.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03622.jpg

[OldSchoolRC]

Was wondering if you were ever going to get it dirty! :) Came out great

[Maxx man]

very sweet! Im likin that "rc" on it

[WrenchHead]

Was wondering if you were ever going to get it dirty! :) Came out great


Thank You Very Much OS.
That means alot to me coming from you. Yes sir it has got to be used.lol
I am not sure if it is "done" yet or not.lol You know me.

[OldSchoolRC]

Call it done...Now that the build is over, everything after this is offically a mod. :):)

[WrenchHead]

Hey All; So I can't leave anything alone for lone can I. Well I scored a drifter sclae kit and got the snorkel bask one and staying put this time. SO from the drifter kit I went witht he wipers and the mirrors. Here are a few pics of the new goodies all installed. Enjoy.l8r,w.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03695.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03696.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03691.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03692.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03693.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03699.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03698.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03694.jpg



Oh and I just have to show some patriatism.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03697.jpg

[WrenchHead]

Well this is a rig of function as well as astetic details. lol I snagged a set of JuFac Carbon Steele center drive shafts off the bay. Well nothing hard to install and hoping they will hold up better than the plastic stockers. Enjoy.l8r,w.


So I came home from work and got the shaft. And went right back to work. After a bit of grub.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03612.jpg


Lil bit of threadlock and some grease and we tossem together and toss em in.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03613.jpg

Carbon tuff stuff.I hope. Will put them to the test.


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03615.jpg

Sorry this pic sux.

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03614.jpg

[WrenchHead]

My Honcho out for a run.Fun truck on a 3cell. :)


Ohhh What a feeling... TOYOTA!!!!!!!!!


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03821.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03826.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03833.jpg

http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03830-1.jpg


http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03832.jpg

Carnage Count;
http://i180.photobucket.com/albums/x254/RCKrazy/SCX-10%20Head%20Honcho/DSC03829-1.jpg

[OldSchoolRC]

looks great Wrench!! Love the sclae accessories

[WrenchHead]

looks great Wrench!! Love the sclae accessories

Yo thanks OS for the props. I like the scale aspect alot. So far this truck has taken a fair bit of abuse. And nothing has broken and is by far a 9 out of 10 in my book overall in performance and durability. I have since added my 3 cell battery and the wheel speed with the 35t motor is great. Also added a Hand Bros chassis mounted steering kit and I trimmed off the posts on the axel for a more scale look. Other than that I have not done anything but drive the rig.It has taken some getting used to since it doeasn't drive or climb anything like my AX-10 rig or my AX-10 based scaler ride.Thanks for looking and thanks for all the kind words fellas.l8r,w.