tphalen
07-13-2010, 07:05 PM
http://www.rcdriver.com/images/press-releases/july-2010/pr-july2010-ae-rc10t4-1-ft-kit.jpg
7-Time R.O.A.R. National Champion!
Since its release in 2003, the RC10T4 remains undefeated on a national level, having won seven consecutive ROAR National Championships. Driven by this continuing success, our designers in Area 51 spent countless hours refining the T4 to meet the demands of todays LiPo batteries and brushless motors. The RC10T4.1 Factory Team kit is the product of all this effort.
The T4.1 Factory Team kit comes armed with Factory Team aluminum rear hubs, V2 slipper, Hi-Flow T4 body, and optimized suspension setup to help you quickly master any track!
RC10T4.1 Factory Team Kit Features:
Factory Team 0.5 degree aluminum rear hubs with oversized outer bearing
Ball differential with light-weight outdrives
Factory Team V2 hard-anodized threaded shock bodies with bleed-screw caps
V2 slipper assembly with high-rate spring for more consistent slipper clutch adjustments
JConcepts Hi-Flow T4 body
JConcepts Double-Dees rear tires in green compound and Carvers front tires in blue compound
CVA joints with pin retainer clips
Carbon fiber battery strap with blue aluminum thumb screws
Blue titanium turnbuckles
Optimized suspension setup for use with LiPo batteries
Suspension mounts for 4°, 3.5°, 3°, and 2.5° rear toe included
Complete set of precision ball bearings
Factory Team blue aluminum hinge pin brace, milled motor plate, servo mounts
... and much more!
Scale: 1:10
Power: Electric
Length: 390mm
Width: 316mm
Weight: 1756g*
Wheelbase: 288mm
Internal Gear Ratio: 2.6:1
Drive: 2WD
#7023
RC10T4.1 Factory Team Kit
MSRP: $409.99
Availability: August 2010
For more information, visit Team Associated's web site at http://www.rc10.com
7-Time R.O.A.R. National Champion!
Since its release in 2003, the RC10T4 remains undefeated on a national level, having won seven consecutive ROAR National Championships. Driven by this continuing success, our designers in Area 51 spent countless hours refining the T4 to meet the demands of todays LiPo batteries and brushless motors. The RC10T4.1 Factory Team kit is the product of all this effort.
The T4.1 Factory Team kit comes armed with Factory Team aluminum rear hubs, V2 slipper, Hi-Flow T4 body, and optimized suspension setup to help you quickly master any track!
RC10T4.1 Factory Team Kit Features:
Factory Team 0.5 degree aluminum rear hubs with oversized outer bearing
Ball differential with light-weight outdrives
Factory Team V2 hard-anodized threaded shock bodies with bleed-screw caps
V2 slipper assembly with high-rate spring for more consistent slipper clutch adjustments
JConcepts Hi-Flow T4 body
JConcepts Double-Dees rear tires in green compound and Carvers front tires in blue compound
CVA joints with pin retainer clips
Carbon fiber battery strap with blue aluminum thumb screws
Blue titanium turnbuckles
Optimized suspension setup for use with LiPo batteries
Suspension mounts for 4°, 3.5°, 3°, and 2.5° rear toe included
Complete set of precision ball bearings
Factory Team blue aluminum hinge pin brace, milled motor plate, servo mounts
... and much more!
Scale: 1:10
Power: Electric
Length: 390mm
Width: 316mm
Weight: 1756g*
Wheelbase: 288mm
Internal Gear Ratio: 2.6:1
Drive: 2WD
#7023
RC10T4.1 Factory Team Kit
MSRP: $409.99
Availability: August 2010
For more information, visit Team Associated's web site at http://www.rc10.com